This question was originally posted on DCIM Support by amber.meier on 2018-04-16
I have been attempting to follow the instructions for generating a CSR for SSL certificate located else were on this site. My equipment is a Netbotz 450 (version 4.5.4).
The problem is that Shift+x within 5 seconds does not break into the underlying linux shell. The session just terminates after 5 seconds. I have attempted these instructions via telnet on a local router and via putty with no success. Are there other options?
This comment was originally posted on DCIM Support by spezialist on 2018-04-16
This is not the first time such a problem. For example, a similar post was recently published on page Re: Creating a Certificate Signing Request (CSR) by customer haseebk2000.
Have you tried using the latest version of PuTTY? On my NetBotz-450 I'm use latest firmware 4.6.2.
This answer was originally posted on DCIM Support by amber.meier on 2018-04-16
Nevermind. I figured this out. For others who have the same problem:
IMMEDIATELY after login credentials press Ctrl+c. You must do this while product and configuration information are still scrolling, otherwise Ctrl+c will just repeat the product/config information. In this case, just keep pressing Ctrl+c repeatedly until you get the root@botname prompt.
Hope this helps!
This comment was originally posted on DCIM Support by spezialist on 2018-04-17
I suspect, that this is a problem with the old NetBotz-4.x firmware 4.5.4, since I have no problems with the latest firmware. I.e. for me, everything works fine as described in section Creating a Certificate Signing Request (CSR).
In any case, thanks for the feedback.
In addition, I highly recommend, that you use the latest NetBotz-4.x firmware, especially since you are going to use HTTPS.
This comment was originally posted on DCIM Support by spezialist on 2018-04-28
Have you been able to solve your problem, or do you have any more questions about it?
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!