BacNET integration

[DCIM_Support]

This question was originally posted on DCIM Support by Sergio on 2019-11-01

---

Hi, is possible integrate BacNET devices with DCE ussing protocol converters or some kind of Gateway, any Device recomendación,

Regards

(CID:151062138)

[DCIM_Support · Accepted solution]

This answer was originally posted on DCIM Support by Erlinson Bravo Garcia on 2019-11-02

---

Hello Sergio, the answer is Yes, ok, el How for me is not easy for explain now because I don´t handle the AS configuration, but you can use an Automation Server (From Schneider) for receive in Bacnet and convert to Modbus TCP using it´s configuration, is not hard I saw the AS GUI but try to contact some EBO tech/Eng for get help...

Regards,

Erlinson Bravo Garcia

(CID:151062175)

[DCIM_Support]

This answer was originally posted on DCIM Support by mike sutton on 2019-11-02

---

Hi Sergio,

I have integrated bacnet into DCE using a SIP gateway that converts bacnet to modbus tcp as long as you get the slave address and the registers a ddf can be written for your device but ddf's for modbus are quite simple to write or ammend.

cheers 

mike 

(CID:151062178)

[DCIM_Support]

This comment was originally posted on DCIM Support by Sergio on 2019-11-05

---

hi, friends,

 thanks for yours answers,

I think we will try Schneider Automation Server.

Regards

(CID:151062887)

[DCIM_Support]

This answer was originally posted on DCIM Support by Vineet K. Sarin on 2019-11-03

---

Hi Sergio,

You can check my tutorials at the following links:

and many more such customization posts I have submitted.

Regards

Vineet

(CID:151062233)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.