This question was originally posted on DCIM Support by Mashwiz on 2019-09-19
Kindly advise what would possibly make a rack pdu freeze as below and how can I restore it to normal operation.
I have tried to reset with the reset button but nothing seem to work, however pdu is still delivering power to the load.
Solved! Go to Solution.
This answer was originally posted on DCIM Support by Garry Priestland on 2019-09-19
This probably a failed unit. In my experience this can happen when the pdu is about 5 years or older (not very often, but it does happen!). Sometimes powering off the PDU for 15 to 30 minutes may recover it, but that is not always practical.
Discuss challenges and get support in energy and automation with 30,000+ experts and peers.
Over 10,000+ support articles are available to help you find answers to your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!