AD auth to external domain

DCIM_Support · ‎2020-07-05

This question was originally posted on DCIM Support by Olegas Domanskis on 2018-11-27

Hello

We are trying to configure following situation.

We have domain A, where all users are registered. We have "tech "domain B, which is accessible for DCO and DCE and it has security groups configured which we want to allow to connect to the systems. There is a trust between A and B domains. We are able to connect with A domain users to the Windows based applications/services (IIS, RDP connections). But I'm unable to configure DCO and DCO for authentications using A domain users. Using B domain users is working OK.

Is such configuration possible at all?

DCIM_Support · ‎2020-07-05

This answer was originally posted on DCIM Support by Jef Faridi on 2018-11-28

Hi Olegas,

How about configuring separate/new authentication server settings for "Domain A" (similar configuration that you have done for Domain B, which works), then you will have two authentication servers configured in DCO, one for Domain B and one for Domain A.

Kind regards

DCIM_Support · ‎2020-07-05

This comment was originally posted on DCIM Support by Olegas Domanskis on 2018-11-28

Hello

Thank you for reply.

Thing is that our network team is quite restrictive and system is beeing put to the "shared" network and they don't want to allow direct connection to the domain A. That's why we are in such situation.

DCIM_Support · ‎2020-07-05

This comment was originally posted on DCIM Support by Jef Faridi on 2018-11-30

Hi Olegas,

You are welcome - then unfortunately your special/complex configuration (as you've already tested) is unsupported in DCO.

Kind regards

DCIM_Support · ‎2020-07-05

This comment was originally posted on DCIM Support by Olegas Domanskis on 2018-12-03

Thank you. Will search for other solution.

DCIM_Support · ‎2020-07-05

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.

Invite a Co-worker

Invitation Sent