What is the compatible SpaceLogic BACnet/IP device firmware version for my EBO or Tridium Niagara N4 installation?
EcoStruxure Building Operation, TAC IA Series
- SpaceLogic BACnet/IP devices
- Tridium Niagara N4.7 and later versions Jace 8000
- Tridium Niagara N4.7 and later versions Enterprise Server
The SpaceLogic (formerly known as SmartX) IP Controllers shipped from the factory may not have the latest firmware installed. It is essential to verify that the controller has the latest firmware build loaded for the EcoStruxure Building Operation version or Tridium Niagara N4 build being used before programming the controller.
The below table contains the supported SpaceLogic BACnet/IP devices firmware for each EBO release.
* New v3.2 features are not supported when used with EBO v3.1.x.
Note: RP-C is only supported on EBO 3.0 and later
SpaceLogic BACnet/IP devices can be upgraded using WorkStation, as explained in Updating Firmware in BACnet/IP Controllers.
SpaceLogic BACnet/IP devices firmware can also be upgraded using the eCommission SmartX Controller mobile application, you can download firmware to either a single BACnet/IP controller or multiple controllers, even if not hosted. This is only supported over an IP connection, as explained in Using the eCommission SmartX Controller Mobile Application to Download Firmware to BACnet/IP Control...
SpaceLogic BACnet/IP devices firmware is only approved at v3.02.03 currently for Jace 8000 and Niagara Enterprise Server using N4.7 and newer platforms.