SmartSensor Display blank with i2/B3-920s controllers

SmartSensor Display blank with i2/B3-920s controllers


SmartSensor Display blank with i2/B3-920s controllers


SmartSensor, 10K OHM (Type 3) Thermistor for Andover Continuum, LCD, 4-button (on/off, up/down, Celsius/Fahrenheit), blank cover (no logo) with i2/B3-920s controllers

Smart Sensor Part number - TTS-SD-LCD-1 Smart Sensor, Lcd Display, 10K OHM (Type 3) Thermistor For Continuum
TTS-SD-LCD-1 Infinity Smart Sensor 6-Button Keypad
TTS-SD-LCD-4-2 Infinity Smart Sensor 4-Button Keypad
Accurate, reliable 10K Type III Thermistor
• LCD display
• Programmable Keypad
• Built-In service port to be used with the RoamIO-2 Service Tool
• Powered directly from an i2 or b3 Field Controller


Connect new version SmartSensor to i2/b3-920 and write PE Program to display any character. This will render a blank SmartSensor display.


New controller revision of software is expected to correct the SmartSensor with LCD display .

i1 controller are still awaiting a change to the smart sensors (21 July 2014)

Update Sept 2015
Firmware versions 4.500076 (b3920) and 3.300009(i2920) include this fix.
Smart Sensor also modified for use with i1

Tags (6)
Labels (1)
No ratings