43453members
218021posts

Setting the Infinet ID of an Infinet device to zero using RoamIO

Setting the Infinet ID of an Infinet device to zero using RoamIO

Issue

How to use RoamIO to set the Infinet ID of Infinet device to zero before re-deploying the device.

Product Line

Andover Continuum, EcoStruxure Building Operation

Environment

Continuum Service Tool

Cause

Need a way to set the Infinet ID of Infinet device to zero before re-deploying the device.

Resolution

 This video demonstrates…

  • Tell if the i2 device has an Infinet ID assigned by observing the TD/RD LEDs on the device.
  • Use the RoamIO to connect directly to the i2 device and reset its Infinet ID to zero.
  • Confirm by visual observation of the device's TD/RD LEDs that the ID has been successfully set to zero.

100% helpful (4/4)
Contributors