Discuss challenges in energy and automation with a global network of peers.

40200members
181704posts

MN300, MN350, MN550 and MN650 SLink sensor setpoint resolution

MN300, MN350, MN550 and MN650 SLink sensor setpoint resolution

Issue

The MN300 with a SLink sensor supported setpoint adjustments of 0.1 unit resolution.
MN350, MN450, MN550 and MN650 with firmware version 2 and 3 only supported setpoint adjustments of 1.0 unit resolution.

Product Line

Satchwell MicroNet

Environment

  • MN350
  • MN450
  • MN550
  • MN650
  • MicroNet

Cause

0.1 unit resolution is not supported on MN350, MN450, MN550 and MN650 with firmware version 2 and 3.

Resolution

Updated June 2019
The MicroNet 50 series range MN350, 450, 550, 650 LCD and Touchscreen have been withdrawn from sale.
The IAC 420, 600 and Touchscreen have now also been withdrawn from sale.
No direct replacement is offered.
Further information on these changes can be found in PA-00495 - Notice of Withdrawal - Satchwell Sigma and PA-00528 - End of Commercialization - Satchwell Sigma.

----------------------------------------------------------------------------------------------------------------------------------------------------------

MicroNet 50 controller firmware version 5 released August 2008, when used with an updated SLink2.FCG file for VisiSat 2.1 Build 148 now supports 0.1 unit resolution changes.

Slink2.FCG File for Micronet 50 Controllers Firmware v5 file.

Additional information can be found in TPA-LOND-09-0029.00 - Touchscreen TS0H Firmware.

Tags (2)
Labels (1)
Attachments
No ratings