New in the Community? Get started here

Schneider Electric Exchange Community

Discuss and solve problems in energy management and automation. Join conversations and share insights on products and solutions. Co-innovate and collaborate with a global network of peers.

Register Now
Building Automation Knowledge Base
Showing results for 
Show  only  | Search instead for 
Did you mean: 
PSST, your community homepage is getting a new face - stay tuned and experience the change in few days

How to configure a schedule in an SE8000


Unable to configure the schedule in SE8000 series thermostat.

Product Line

EcoStruxure Building Expert, Field Devices




The system is not following building occupancy and operation as needed


Tap and hold the top middle of the screen and tap on lower right arrow of page 1/2 setup.

There are seven different schedule setting screens, one for each day of the week. Each day can have different scheduled events.


The options settings allow the Room Controller to function in Occupied or Unoccupied.

Occupancy Command

Local occupancy: occupancy is determined by local PIR or schedule, as configured under Occ. Source from the configuration menu.

Schedule Type

  • 7 days: Independent scheduling for each day
  • 5+1+1 days: Weekdays scheduling and Independent Weekend scheduling for Saturday and Sunday
  • 5+2 days: Weekdays scheduling and Weekend scheduling

Tags (3)
100% helpful (1/1)