New in the Community? Get started here

Schneider Electric Exchange Community

Discuss and solve problems in energy management and automation. Join conversations and share insights on products and solutions. Co-innovate and collaborate with a global network of peers.

Register Now
Building Automation Knowledge Base
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
PSST, your community homepage is getting a new face - stay tuned and experience the change in few days

Heat Meter customer number and modbus address

Issue

The Heat Meter now has a barcode where the customer number use to be printed. From the customer number the modbus slave ID could be determined.

Product Line

Field Devices

Environment

  • Modbus
  • Heat Meter

Cause

The Heat Meter now has a barcode where the customer number previously had been printed. From the customer number the modbus slave ID could be determined.

Resolution

The customer number is a replica of the serial number. The last 3 digits are the modbus slave ID, except when the last 3 digits are 248 or higher, then the slave ID is the last 2 digits.

In this case, the slave ID is 210.

kamstrup.JPG

Tags (1)
Labels (1)
No ratings