Issue
Cannot connect MD20B-230 actuator to MBX4451 valve, using a 914-1071-000 linkage.
Product Line
Field Devices
Environment
- MD Actuator
- MB valve
- MBX valve
- Linkage
Cause
The existing documentation is very unclear and shows the wrong bracket.
Resolution
The issue arises initially in that a different bracket is shown in the current documentation.
The second issue is that there is a circlip on the back of the actuator which must be positioned before fitting the bracket. Below is a picture showing the correctly circlip and bracket. Please take note of the circlip position.
Revised documentation will be available in due course.