In rare occurrences, technicians may remove the bottom terminal from the AS or I/O Baseplate so that a power supply can fit. The backplanes inside the baseplates are not all the same and this will not work.
Visually determine which baseplate is for each module.
EcoStruxure Building Operation
- SmartStruxure Power Supply
- SmartStruxure Automation Server
- SmartStruxure I/O module
Incorrect baseplate will not work on the SmartStruxure modules.
See picture for representation of Power Supply backplane, the other configuration is for Automation Server (and I/O modules).
For more detailed information please see the Hardware Reference Guide.