I have a few question about BCPMA084S branch circuit monitor.
Is the 4 current strip an and main board connected together? It is possible to change the main board with another BCPMA084S board. Or the whole systems is calibrated together? The 4 current strip and the main board is calibrated with each other?
The other question is that, where can I find the firmware to the BCPMA modules?
What is the different between the firmware’s? Is there some release notes?
Solved! Go to Solution.
Thanks for your questions and interest in BCPM.
My first recommendation is to orient you towards our website:
This being said, BCPM range is extremely specific, so, much more difficult than other Power Metering ranges to document globally.
I strongly suggest you to get in touch with your local Customer Care Center, to benefit a relevant answer.
Thanks for your reply.
So than there is no information about the different BCPM modules and firmware’s? (release notes)
Discuss challenges in energy and automation with 30,000+ experts and peers.
Find answers in 10,000+ support articles to help solve your product and business challenges.
Find peer based solutions to your questions. Provide answers for fellow community members!