New in the Community? Get started here

Schneider Electric Exchange Community

Discuss and solve problems in energy management and automation. Join conversations and share insights on products and solutions. Co-innovate and collaborate with a global network of peers.

Register Now
Ask Exchange
A product or an access issues? A question regarding the shop? Ask your questions to moderators & experts.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to configure Power Tag in PME

Hi all,


I didn't configured Power Tag before. May i get the documents and links regarding How to add and configure Power Tag in PME?






Re: How to configure Power Tag in PME

Hello @jagadeesh_s , I add @Calvin_HopWo to this thread, he should be able to help you!


PS: do not hesitate to check the Knowledge base & use the global search bar to see if your issue was already raised before 😉 


Exchange SE Global Community Manager
Community user guide  |   FAQ


Re: How to configure Power Tag in PME

You have to use smartlink In order to use PowerTag. It has web page where you can discover and configure the PowerTag connected to it. After that smartlink will act as a gateway to Modbus for PowerTags. So you can simply add the modbus TCP gateway in PME and create the PowerTag as Modbus RTU devices.