can I use PowerView for SUA1500VA?

[liangyuan43_apc]

This was originally posted on APC forums on 10/21/2009

---

I am using a SUA1500VA UPS for a backup power supply now, but the UPS was put in a pretty high place. I want to check the UPS without climbing up to a 15 feet high place.

Does PowerView, AP9215, work with SUA1500VA series? it seems in the AP9215's manual, it says it works with SU1500.

anyone has idea about it?

or any other solution?

Thanks,E

[liangyuan43_apc]

This was originally posted on APC forums on 10/21/2009

---

another question, if I have many SUA1500VA UPS, can I just use one PowerView to inspect those UPS? just like the cable mounted on the UPS. once I want to inspect the UPS, I just plug the PowerView in.

Is that possible?

[Erasmus_apc]

This was originally posted on APC forums on 10/22/2009

---

The PowerView is used only to communicate with 1 UPS. It has no capacity for interpreting multiple signals of any kind, and needs to be directly connected to your UPS.

[voidstar_apc]

This was originally posted on APC forums on 10/22/2009

---

You can use the PowerView to monitor one UPS at a time. You can unplug it from one UPS and put it on another one as needed.

[Erasmus_apc · Accepted solution]

This was originally posted on APC forums on 10/21/2009

---

Yes, the AP9215 will work with an SUA1500.