battery af cs 650 and powerchute xp64

[barrubba_apc]

This was originally posted on APC forums on 5/5/2010

---

I have an apc cs 650.
and 'possible that the battery is discharged after four years?
There PowerChute for Windows XP 64-bit?
Alternatively there are other software?

[barrubba_apc]

This was originally posted on APC forums on 5/5/2010

---

yes, is on continued ude since i've byed it, 4 years ago.
There is some plus/pro software version, even specifically nto for my apc, that can run under xp64?

thankx

[juangele_apc]

This was originally posted on APC forums on 5/5/2010

---

Hi,

Refer to [Kbase 8301|http://nam-en.apc.com/cgi-bin/nam_en.cfg/php/enduser/std_adp.php?p_faqid=8301&p_created=1168368717&p...] for battery life of APC UPS. Usually, we recommend customer to replace battery once every 3 years, still depending how often the battery is being used.

[barrubba_apc]

This was originally posted on APC forums on 5/6/2010

---

in this 4 years has been powered on, an average time of 10 hour a day. so?
3 : "Only perform runtime calibrations on your UPS one or two times a year,..."
How can i perform runtime calibration?

About the software?

[juangele_apc]

This was originally posted on APC forums on 5/7/2010

---

Hi,

Manual runtime calibration are usually done, for those new batteries or not too old type of batteries, in which the runtime doesn't match the ideal runtime. Since the battery is now 4 years old, it's not adviseable to do runtime calibration anymore. But, yes, runtime calibration can be done thru software or manually.

[barrubba_apc · Accepted solution]

This was originally posted on APC forums on 5/5/2010

---

I have an apc cs 650.
and 'possible that the battery is discharged after four years?
There PowerChute for Windows XP 64-bit?
Alternatively there are other software?