Problem with APC-Back UPS-RS 500

[nathaniyelu_apc]

This was originally posted on APC forums on 5/9/2014

---

Hi,this is Nathaniyelu from INDIA, i got a problem with my APC Back-ups-RS 500,purchased in 2009,

relays are continuously clicking ..later i opened and found Two Electrolytic Caps  bulged(each 4.7MF,450V) and one Cap(blackened--22MF,50V) i replaced all  with new ones and connected to supply(220V 50Hz),now the UPS continuously beeping whenever switch ON,few days back i  connected LCD monitor to UPS without mains..i.e on Battery ,LCD monitor was not ON but relays r continuously clicking...earlier Battery Charge without load..12.48V..now 9.3V. without battery there is 3V across  battery charging terminals  ..what could be the problem...,

Thanks in advance...

[BillP]

This reply was originally posted by Angela on APC forums on 5/9/2014

---

I know we don't provide schematics for these publicly or instruct users on repairs directly so if anyone else would like to share information or assist, please do so at your own risk.

[nathaniyelu_apc]

This was originally posted on APC forums on 5/12/2014

---

Thank u for your kind reply,i may be need of Ups schematic, i cannot send direct messages to you..

??allow me to  send direct  message..

[BillP · Accepted solution]

This reply was originally posted by Angela on APC forums on 5/12/2014

---

We cannot provide a schematic even privately as they are proprietary..

Where can I find schematics for my APC product? | FAQs | Schneider Electric US