Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
80810members
346872posts

ES700 doesn't power on - battery dead?

Solved
thoresson_apc
Crewman
Crewman
0 Likes
1
134

ES700 doesn't power on - battery dead?

This was originally posted on APC forums on 8/11/2010


Hi,

I have been using a ES 700 for two years as an UPS for my ReadyNas. Now, the ES 700 won't power on any more. When I press the button, nothing happens. If I press and holds, the green light sometime turns on, sometimes not. Sound indication varies from a single beep indicating that everything is fine, to a rapid beeping. Or just nothing.

Also, when this happened the first time, my Readynas warned me that the battery level on the UPS was critical low and every time I try to turn the UPS on now, my Readynas sends a new email about low battery levels.

There is no red light telling me that the battery needs to be changed, but what else can it be? I have power on the surge arrest outlets.

/Anders

Tags (2)

Accepted Solutions
thoresson_apc
Crewman
Crewman
0 Likes
0
134

ES700 doesn't power on - battery dead?

This was originally posted on APC forums on 8/11/2010


Hi,

I have been using a ES 700 for two years as an UPS for my ReadyNas. Now, the ES 700 won't power on any more. When I press the button, nothing happens. If I press and holds, the green light sometime turns on, sometimes not. Sound indication varies from a single beep indicating that everything is fine, to a rapid beeping. Or just nothing.

Also, when this happened the first time, my Readynas warned me that the battery level on the UPS was critical low and every time I try to turn the UPS on now, my Readynas sends a new email about low battery levels.

There is no red light telling me that the battery needs to be changed, but what else can it be? I have power on the surge arrest outlets.

/Anders

See Answer In Context

1 Reply 1
thoresson_apc
Crewman
Crewman
0 Likes
0
135

ES700 doesn't power on - battery dead?

This was originally posted on APC forums on 8/11/2010


Hi,

I have been using a ES 700 for two years as an UPS for my ReadyNas. Now, the ES 700 won't power on any more. When I press the button, nothing happens. If I press and holds, the green light sometime turns on, sometimes not. Sound indication varies from a single beep indicating that everything is fine, to a rapid beeping. Or just nothing.

Also, when this happened the first time, my Readynas warned me that the battery level on the UPS was critical low and every time I try to turn the UPS on now, my Readynas sends a new email about low battery levels.

There is no red light telling me that the battery needs to be changed, but what else can it be? I have power on the surge arrest outlets.

/Anders