looking for a PDU

[net_tech_apc]

This was originally posted on APC forums on 3/7/2016

---

Hi!

I have an HPM Series Rack, HPM-4 from Middle Atlantic. 2Us are used up by the patch panel leaving me with 2Us of free space. There is an equipment rack right below the HPM-4 and I was hopping to save 2Us by installing a PDU unit (15AMP outlets) right in the HPM-4 rack which is only 6 inches deep.

Would any  of the APC PDUs fit in 6 inches of space? Do any of 1 or 2 U PDUs have the temperature monitoring capabilities?

Thank you very much.

[mitsmith_apc · Accepted solution]

This was originally posted on APC forums on 3/7/2016

---

Hi Net,

Try looking at our PDU selector tool. http://www.apc.com/tools/selector/pdu/

The horizontal PDU's should work in your rack as they are about 4 inches deep. 

Unfortunately, none of our horizontal PDU have environmental monitoring capabilities.

The most basic option AP9562. 

Let me know if you have any questions about one you come across. 

[net_tech_apc]

This was originally posted on APC forums on 3/7/2016

---

Thank you!