SMART UPS 2200 + PowerChute Network Shutdown

[BillP]

This question was originally posted by Mike on APC forums on 11/25/2010

---

I have installed a smart ups 2200 with the network management card.
I am running VMWARE ESXi 4.0.

Installed the Power Chute Network Shut Down on the Vmware Management Assistant, and configured network management card.

I was wondering if anyone would be able to give me input if I have this set up right to have this configured correctly to have the guest OS's shut down properly in a power outage.

In Vsphere I have set the Virtual Machine Startup/Shutdown to be enabled. Each Guest OS is set to auto start up and stop with the system.

I noticed when I am logged into the Power Chute Network Shutdown console there is a spot to Configure Events. Right now everything is set to Log Event, but nothing is set to Shut Down System.


Thank you for your help.

[BillP]

This reply was originally posted by Jonathan on APC forums on 11/29/2010

---

Here are some APC Knowledgebases that I found that I hope could help you out.

http://nam-en.apc.com/app/answers/detail/a_id/10330/kw/vmware%204.0
http://nam-en.apc.com/ci/fattach/get/599239/1279201965/redirect/1

[BillP]

This reply was originally posted by Mike on APC forums on 11/29/2010

---

Thanks for the links, incase anyone else is wondering, I found this link to be helpful,

http://emea-en.apc.com/app/answers/detail/a_id/10380/~/configure-powerchute-network-shutdown-to-shut...

[BillP · Accepted solution]

This reply was originally posted by Jonathan on APC forums on 11/29/2010

---

Glad we were able to help. I forgot to paste that link but I am happy you got it.