Remote management - over the LAN

[ckh0d0a_apc]

This was originally posted on APC forums on 1/27/2016

---

SMX1500RM2uNC - we can access the unit via USB.  But we want to place the unit in a wiring closet - data switch, watchgaurd firewall, and cable modem.  Can we manage the device over the LAN?  Possibly the "Device IP Configuration Wizard.exe"  ?

[BillP]

This reply was originally posted by Bill on APC forums on 1/27/2016

---

Hi,

After configuring the network card installed in the UPS you can then manage the device over the network. See page 9 of the

Network Management card installation guide for instruction on how to configure the card. 

[ckh0d0a_apc · Accepted solution]

This was originally posted on APC forums on 1/27/2016

---

Thank You ... we are good to go.