Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
79300members
343972posts

Matrix 5000 - 0.00 Voltage In/Out

Solved
MarkGinger_apc
Lieutenant
Lieutenant
0 Likes
1
120

Matrix 5000 - 0.00 Voltage In/Out

This was originally posted on APC forums on 5/20/2010


Hi Guys,



Looking for some ideas with a Matrix 5000 that says 0.00 V in/out. The unit is set to 240V, is getting 242V in. It powers on but a relay is clicking every second and says 0.00 voltage input and output. The unit is not holding a load. The SmartCells are good, and the unit was good up to a week ago when we moved offices.


Any trouble shooting suggestions?


Accepted Solutions
MarkGinger_apc
Lieutenant
Lieutenant
0 Likes
0
120

Matrix 5000 - 0.00 Voltage In/Out

This was originally posted on APC forums on 5/20/2010


Hi Guys,



Looking for some ideas with a Matrix 5000 that says 0.00 V in/out. The unit is set to 240V, is getting 242V in. It powers on but a relay is clicking every second and says 0.00 voltage input and output. The unit is not holding a load. The SmartCells are good, and the unit was good up to a week ago when we moved offices.


Any trouble shooting suggestions?

See Answer In Context

1 Reply 1
MarkGinger_apc
Lieutenant
Lieutenant
0 Likes
0
121

Matrix 5000 - 0.00 Voltage In/Out

This was originally posted on APC forums on 5/20/2010


Hi Guys,



Looking for some ideas with a Matrix 5000 that says 0.00 V in/out. The unit is set to 240V, is getting 242V in. It powers on but a relay is clicking every second and says 0.00 voltage input and output. The unit is not holding a load. The SmartCells are good, and the unit was good up to a week ago when we moved offices.


Any trouble shooting suggestions?