Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
79243members
343874posts

Back UPS BX1100 - powerchute problem

Solved
itech.sjb_at_gmail.com_apc
Cadet
0 Likes
1
89

Back UPS BX1100 - powerchute problem

This was originally posted on APC forums on 6/10/2013


how to powerchute or auto shutdown 2 computers in 1 back UPS, im using "back ups BX1100ci-as"..

Thank you 😃


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
89

Re: Back UPS BX1100 - powerchute problem

This reply was originally posted by Bill on APC forums on 6/10/2013


Hi,

PowerChute Personal Edition (PCPE) will only communicate with 1 computer at a time. To shutdown a second system if you understand scripting you could run a command file that shuts the other computer down. Schneider Electric does not official support scripting PCPE however one of our other customer did post instruction on how to do it Powerchute Personal Edition - Run external commands with this utility

Your other options would be to use Windows Native shutdown and script that. See Kbase FA159653 http://www.apc.com/site/support/index.cfm/faq/

The other option is to install apcupsd which is a 3rd party application that can be scripted.

See Answer In Context

1 Reply 1
BillP
Administrator Administrator
Administrator
0 Likes
0
90

Re: Back UPS BX1100 - powerchute problem

This reply was originally posted by Bill on APC forums on 6/10/2013


Hi,

PowerChute Personal Edition (PCPE) will only communicate with 1 computer at a time. To shutdown a second system if you understand scripting you could run a command file that shuts the other computer down. Schneider Electric does not official support scripting PCPE however one of our other customer did post instruction on how to do it Powerchute Personal Edition - Run external commands with this utility

Your other options would be to use Windows Native shutdown and script that. See Kbase FA159653 http://www.apc.com/site/support/index.cfm/faq/

The other option is to install apcupsd which is a 3rd party application that can be scripted.