Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
79337members
344029posts

APC Xs1500 Telephone cable to where?

Solved
drittner_apc
Cadet
0 Likes
1
83

APC Xs1500 Telephone cable to where?

This was originally posted on APC forums on 11/5/2017


I purchased a XS1500 and want to plug in the telephone cable to my iMac so I can have it power down automatically but I cannot figure which telephone jack it goes into on the APC?  There are three jacks?  Any help would be appreciated.

Don


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
83

Re: APC Xs1500 Telephone cable to where?

This reply was originally posted by Angela on APC forums on 11/6/2017


Hi Don,

You should've received a RJ-45 to USB cable. The ends look like this hopefully:

FmX2pq5JdXyvkPLQy8%2ByEQ%3D%3D.png

The RJ-45 connector end (shown in the left of the above photo) plugs into the port labeled "data port" on the rear of your UPS. The USB connector goes to your iMac.

The below picture should be generally what the back/rear of your UPS looks like. The "data port" is item #2.

c46mycuoTeD7zNlkYjKrZg%3D%3D.png

See Answer In Context

1 Reply 1
BillP
Administrator Administrator
Administrator
0 Likes
0
84

Re: APC Xs1500 Telephone cable to where?

This reply was originally posted by Angela on APC forums on 11/6/2017


Hi Don,

You should've received a RJ-45 to USB cable. The ends look like this hopefully:

FmX2pq5JdXyvkPLQy8%2ByEQ%3D%3D.png

The RJ-45 connector end (shown in the left of the above photo) plugs into the port labeled "data port" on the rear of your UPS. The USB connector goes to your iMac.

The below picture should be generally what the back/rear of your UPS looks like. The "data port" is item #2.

c46mycuoTeD7zNlkYjKrZg%3D%3D.png